Service Bulletin 服務(wù)通告

20/04/1961 Fuel Cock Operation Rod
20/04/1961 Introduction
20/04/1961 Fuel Tank Filler Cap - O-Ring Replacement
26/04/1961 S4 and S6 Bendix Magnetos
12/05/1961 Propeller Control
16/06/1961 Propeller Control Linkage Bearing
07/07/1961 Never Exceed Speed
07/07/1961 Reinforcement of Horizontal Stabilizer Attachment
07/07/1961 Increase of Max Gross Weight from 1800 to 1960 kg
19/07/1961 Repair of Front Engine Cowling
27/07/1961 Tire Pressure of Main Wheels
02/08/1961 Aileron and Flap Attachment Bracket
18/08/1961 Cabin Door Handle
30/01/1962 Actuating Levers of Carburetor Heat
30/01/1962 Replacement of the Bolts in Control Mechanism
30/01/1962 Gust Lock on the Control Stick
30/01/1962 Clear-vue Panel
31/01/1962 Fuel Booster Pump - Replacement of
11/10/1962 Interconnection Between Rudder and Aileron Controls
18/02/1963 Operating Instructions for PC-6/A
07/03/1963 Fuel Tank Vent System
01/01/1964 Rudder Pedal Support (Superseded by SB 65)
01/01/1964 Aileron Balance Weight
01/01/1964 Horizontal Stabilizer Screw Jack Support
09/04/1964 Speed Limits with Skis Installed
09/04/1964 Installation of Additional Primer Line Clamps on Lycoming Engines
09/04/1964 Propeller Blade Check
21/04/1964 Recommended Overhaul Periods for Lycoming Engines
01/01/1965 Battery Installation Below Pilots Seat
01/02/1965 Oleo Strut Attachment on Fuselage (Main Landing Gear)
01/02/1965 Selector Valve for Air Intake Heating
08/02/1965 Increase of Max. Gross Weight from 1960 to 2200 kg - H-Version
20/04/1965 Ratier Service Bulletin No. 13
21/04/1965 Re-Routing of Governor Air Pressure Line on PT6A-6Engine (UACL Service Bulletin No. 27)
21/04/1965 Inspection Following Over-speed or Over-boost on Lycoming Engine
01/06/1965 Jo-Bolts on Main Landing Gear Oleo Struts
01/09/1965 Passenger Seat Stowage Behind Rear Cabin Wall
01/09/1965 Brackets on Fuselage For Float Installation
01/09/1965 Functional Check of Propeller Pitch Control
01/09/1965 Supports for External Store Attachments on Wings
01/09/1965 Sliding Cabin Door
01/09/1965 Replacement of Fuel Valve
01/11/1965 Cylinder Modification to Prevent Cracks at Spark Plug Location
01/11/1965 Magneto Drop-Off
01/11/1965 Cooling of Engine Shock Mount
01/11/1965 Reinforcement of Rudder Attachment
01/11/1965 Reinforcement of Elevator Cable Entry on Horizontal Stabilizer
01/11/1965 Reinforcement of Rear Part of Fuselage
01/12/1965 Reinforcement of Elevator
01/12/1965 Corrosion Prevention of Engine Support Strut
01/01/1966 Oil Hose To Oil Cooler
01/01/1966 Priming Valve Control Rod
01/01/1966 Engine Mount Ring
01/01/1966 Air Inlet Duct in Nose Section
01/03/1966 Securing of Aileron and Landing Flap Bearing
01/03/1966 Protection Bellows on Landing Gear Struts
01/09/1966 Rudder Pedal Support
01/10/1966 Triple Seats